Swich to desktop website
MS Smart Taildocker, excluding knife
- 0909999
This standing model taildocker is an electronic instrument used for docking the tails of newborn piglets.
Characteristics MS Smart Taildocker:
- Extra capacity therefore the temperature of the knife is higher and more constant
- The hot knife will remove the tail and cauterize the wound at the same time
- Dramatically reducing the incidence of infection
- Control switch with 3 levels
- 220 Volt
- Standard delivered without v-knife, adaptor and chuck recon set:
- Inlay V-knife for MS Smart Taildocker (0909982-7)
- 2x M5 Adaptor for inlay knives (0909981)
- Smart Tail Docker chuck recon set, S.S. (0909983)
By means of a mounting bracket (0909854), the MS Smart Taildocker can also be hung on the pen partition or treatment box.
Use:
- At the front is a control switch because of the different heat resistances of the V-knives mounted on the taildocker
- Adjust the heat control switch so that the V-knife glows orange
- When the V-knife glows white you have to lower the heat control, to increase the durability of the V-knife
- With the heat control switch user can adjust to the electronic instrument too: low, medium or high
- By mounting of the V-knifes fix the mounting screws correctly, to aid the heat conductivity to the V- knife
Product dimensions:
- 255 x 230 x 180 mm
Technical specifications:
- Safety transformer, encapsulated
- Standard : EN 61558-2-6
- Protection : Class II / singular isolated
- Weight : ± 4,2 kg
- Powes secundary : 100A
- Capacity : 100 VA
- Frequency : 50/60Hz
- Working time : 100%
- Insulation class : E
- Fuse: 1,6A
This standing model taildocker is an electronic instrument used for docking the tails of newborn piglets.
Characteristics MS Smart Taildocker:
- Extra capacity therefore the temperature of the knife is higher and more constant
- The hot knife will remove the tail and cauterize the wound at the same time
- Dramatically reducing the incidence of infection
- Control switch with 3 levels
- 220 Volt
- Standard delivered without v-knife, adaptor and chuck recon set:
- Inlay V-knife for MS Smart Taildocker (0909982-7)
- 2x M5 Adaptor for inlay knives (0909981)
- Smart Tail Docker chuck recon set, S.S. (0909983)
By means of a mounting bracket (0909854), the MS Smart Taildocker can also be hung on the pen partition or treatment box.
Use:
- At the front is a control switch because of the different heat resistances of the V-knives mounted on the taildocker
- Adjust the heat control switch so that the V-knife glows orange
- When the V-knife glows white you have to lower the heat control, to increase the durability of the V-knife
- With the heat control switch user can adjust to the electronic instrument too: low, medium or high
- By mounting of the V-knifes fix the mounting screws correctly, to aid the heat conductivity to the V- knife
Product dimensions:
- 255 x 230 x 180 mm
Technical specifications:
- Safety transformer, encapsulated
- Standard : EN 61558-2-6
- Protection : Class II / singular isolated
- Weight : ± 4,2 kg
- Powes secundary : 100A
- Capacity : 100 VA
- Frequency : 50/60Hz
- Working time : 100%
- Insulation class : E
- Fuse: 1,6A