:format(webp))
Let's get your MS AutoHoofClean running
Follow these steps to get it installed and ready to go.1
Installing the filter housing
Assemble the included filter housing. Use the provided tool to tighten the filter housing in place on the pump.1.1
Connecting the water supply
Start by connecting the water supply to the AHC system. You do this by connecting the water hose with GeKa coupling to the left side of the unit.2
Installing the intake hoses to the pumps
1. Remove the black cap and red stopper from the pump. 2. Slide the black cap onto the suction hose. 3. Insert the hose fully into the pump and reattach the cap securely. 4. Gently pull both hoses to ensure they are firmly connected.3
Installing the empty detector on the suction hoses
Set-up the empty detectors at the suction hoses to prevent the pump running dry. The detectors give an alert when your product containers are (almost) empty.4
Connecting the MS AutoHoofClean system
Connect the hoses and power supply6
Set-up language, date & time
Select your prefered language and set-up the correct date and time7
Start-up and testing
Start-up the MS AutoHoofClean and test if the system is working correctly:format(webp))
8
Install the antenna
Attach the antenna to the pump. Check if the network signal is strong enough. Is the signal too weak? Move the antenna outside or mount it higher. Use the bracket to install the antenna on the wall.:format(webp))
9
Pair the pump in the HyCare App
Switch on the pump and make sure your smartphone is nearby. Check if your network is working properly and place the antenna in the correct position. Open the HyCare app and follow the steps to pair the pump.Frequently asked questions
Troubleshooting guide
Unsure about installation or maintenance?
We're happy to help you get started!
Our specialists are ready to advise you on the right setup, settings, and maintenance.
Feel free to contact us for personalized advice, or schedule an on-site appointment for support. That way, you can be sure your system is working optimally from day one.
:format(webp))
:format(webp))
Built to last. Designed for easy maintenance.
The MS AutoHoofClean is build to last for a long time. We have designed the system for easy access to all major components. To keep your MS AutoHoofClean pump in optimal condition the components are available as spare parts. You can fix it yourself.
:format(webp)){kind=logo}
