MS Pulse 250 is a needle free injection system. The pressure source (compressed air) takes care of penetrating the liquid into the skin and divide into the underlying tissue layers.
| Pieces | 1 |
| Warranty | 1 year from delivery date, there is no warranty for wear and tear parts / improper use / breakage / failure to perform maintenance |
| Document note | Always read the user manual before use. |
| Animal group | Pigs |
MS Pulse 250 Toolkit
1406510
Set seals CO² Tank for MS Pulse 250, p/5
1406515
Seal dose plug for MS Pulse 250
1406517
Injection Gun blue 0,5-2,5 cc MS P250
1406521
Nozzle 0,27 for Injection Gun MS P250
1406525
Nozzle 0,35 for Injection Gun MS P250
1406527
Dose Plug 0,5 cc for MS Pulse 250
1406530
Dose Plug 2,5 cc for MS Pulse 250
1406534
High Pressure Hose 3055 mm, MS Pulse 250
1406541
Reducing valve primary for MS Pulse 250
1406561
Spiral air hose for the MS Pulse
1406563
Hose mounting + connection 20 mm MS P250
1406570
Hose mounting + connection 33 mm MS P250
1406578
Hose Mounting inlet MS Pulse 250
1406573
Bottle mounting,loose bolt 30mm MS P250
1406575
Bottle mounting,loose bolt 20mm MS P250
1406576
Bottle mounting,loose bolt 33mm MS P250
1406577
Direct Bottle Mounting 20 mm for MS P250
1406579
Injection pen housing for MS Pulse 250
8802802
Injection pen for MS Pulse 250
8802803
Closing piece, 5 mm, for MS Pulse 250
8802804
Ball lock for MS Pulse 250
8802805
Dust sealing for MS Pulse 250
8802806
Nozzle nut for MS Pulse 250
8802807
Piston 80 mm + ring / sealing MS P250
8802808
Cylinder 80 mm aluminium for MS Pulse250
8802809
Sealing ring, 80 mm, for MS Pulse 250
8802810
Venting valve for MS Pulse 250
8802811
O-ring 80 mm cylinder base for MS P250
8802812
Dosing chamber outlet valve for MS P250
8802813
Dosing chamber 2011, MS P250 nozzle
8802814
Dosing chamber inlet valve for MS P250
8802815
Dose plunger 2011,MS P250 dosing chamber
8802816
Backer ring piston for MS P250
8802817
Orifice bullet 008 hole 1/4 for MS P250
8802818
Bottle mounting inlet valve MS P250
8802820
Timing chamber assembly for MS Pulse 250
8802821
Iron Ball, 1/8", inlet valve MS Pulse 50/250
8802822
Venting valve bottle mount. MS P50/250
8802823
Venting valve holder for MS P50/250
8802824
Outlet valve, complete, for MS P50
8802825
Nozzle 0,20 for Injection Gun MS P250
1406547
Fixed setup for LD 0.5-2.5 inj. gun
1406528
Stationary for MS Pulse 250
1406529
Fixed arrangement for MS P250 supplement
1406539
MS Pulse 250 high-pressure hose, 750 mm
1406543
Reducing valve primary for MS Pulse
1406567
Bottle Holder 600 cc MS Pulse 250
1406581
Spring for stationary MS Pulse 250
1406582
Regulator for MS Pulse 250
8802833
Slide valve clip for regulator P250
8802864
Top plate MS P250
8802908
Bottom plate MS P250
8802909
Clip for dose plug MS P250
8802910
Top plate 3mm for MS P250
8802911
Amplifier cover MS P250
8802913
Nut for needle bottle holder MS P50/P250
8802915
Push-inn L-fitting 6mm
8804805
Push-in air fitting 1/8x6 mm for 1406500
8804807
Push-in air fitting, T, 3 x 6 mm
8804822
Quick Coupling T-piece US 6 x 6 x 1/8"
8804844
Quick Coupling 90˚ US 1/8"
8804845
Quick Coupling T-piece US 1/8"
8804846
Quick Coupling 90˚ US M5 x 0,8”
8804847
Quick Coupling 90˚ US even
8804848
Air chamber valve US for MS P250
8804849
Nozzle for Injection Gun MS P250
M1406525
Dose Plug for MS Pulse 250
M1406530
Hose mounting + connection MS P250
M1406570
Bottle mounting nut for MS Pulse250
M1406575
