B component of the MSE Mortar Forte Rapid 28 kg set. Can only be used in combination with A component (6304212) and C component of the article series 6304220.
The MSE Mortar Forte Rapid is an epoxy mortar coating consisting of three components: resin, hardener and dry quartz sand.
The mortar coating is placed in a single layer due to the angled structure of this sand. This immediately creates a good anti-slip and a good cleanability. The MSE Mortar Forte is very useable in various sectors. Available in the colours natural, blue, red and green.
Application: The MSE Mortar Forte Rapid is placed on absorbent/push hard surfaces on the MSE Primecoat trans. Especially for those areas that are chemically and mechanically highly stressed and that should be taken back into use after 4 hours.
| Area to be coated | Feed kitchen, Hygiene sluice, Parlor, Piggery, Poultry stable |
| Pieces | 1 |
| Components | B |
| CLP regulation | This item is subject to CLP regulation. Please read the safety instructions before use. |
| UN number | UN2735 |
| Coating layer | Mortar |
| Warranty | Standard, in accordance with our general service & warranty conditions, listed under the heading "Customer Service -> Complaints & Returns" at the bottom of this web page. |
| Coating type | Floor coating |
| Hazardous product | Yes |
| Animal group | Cattle, Pigs, Poultry, Goats |
| Manual | Always read the user manual before use |
| Volume | 0.84 kg |
B component of the MSE Mortar Forte Rapid 28 kg set. Can only be used in combination with A component (6304212) and C component of the article series 6304220.
The MSE Mortar Forte Rapid is an epoxy mortar coating consisting of three components: resin, hardener and dry quartz sand.
The mortar coating is placed in a single layer due to the angled structure of this sand. This immediately creates a good anti-slip and a good cleanability. The MSE Mortar Forte is very useable in various sectors. Available in the colours natural, blue, red and green.
Application: The MSE Mortar Forte Rapid is placed on absorbent/push hard surfaces on the MSE Primecoat trans. Especially for those areas that are chemically and mechanically highly stressed and that should be taken back into use after 4 hours.
| Area to be coated | Feed kitchen, Hygiene sluice, Parlor, Piggery, Poultry stable |
| Pieces | 1 |
| Components | B |
| CLP regulation | This item is subject to CLP regulation. Please read the safety instructions before use. |
| UN number | UN2735 |
| Coating layer | Mortar |
| Warranty | Standard, in accordance with our general service & warranty conditions, listed under the heading "Customer Service -> Complaints & Returns" at the bottom of this web page. |
| Coating type | Floor coating |
| Hazardous product | Yes |
| Animal group | Cattle, Pigs, Poultry, Goats |
| Manual | Always read the user manual before use |
| Volume | 0.84 kg |
