The MS Floorcoat is a unique 2-components expoxy floor coating with a very high resistance against ammonia, acids and the most common chemicals in intensive farming.

The product is also very good mechanical resistant. After applying the first layer MS-100 Primecoat-trans it is suitable.

Can also be used as a topcoat or as an intermediate layer if you use a non-slip material. Can only be used in combination with B-component. Pack sizes: 1,5 and 10 kg.

• Consumption: 0,2 to 0,7 kg/m² per layer. Depending on substrate and sprinkled non-slip material
• Consumption intermediate layer: 0,2 to 0,4 kg/m²
• Consumption finish layer without non-slip: 0,2 to 0,4 kg/m²
• Consumption finish layer on Silver sand: 0,5 to 0,6 kg/m²
• Drying time: 16-24 hours depending on the temperature of the environment
• Mixture ratio: Packed in sets, so mix the A-comp and B-comp
• Working temperature: between 10°C and 25°C
• Application material: roller/scoop, brushes, mixer
• Substrate: MS Primecoat-trans or MS Floorcoat treated floor
• Other RAL-colours are available when ordering over 100 kg