MS Gel Repair, 5,5 kg

MS Gel Repair is a transparent epoxy gel coating consisting of 2 components for filling cracks, joints and saw cuts in concrete and cement screed floors. This creates a flat and liquid-tight floor that is very easy to clean for optimal hygiene.

The MS Gel Repair is a transparent epoxy gel consisting of two components. Because it is a fairly stiff gel, it flows into the cracks and seams, but continues hanging as a drop.

Application: The MS Gel Repair is applied in cracks and seams, where ever they need to be sealed. For repair or to seal joints in unhygienic dilation e.g. in poultry houses.

• For a flat and hygienic floor
• Waterproof
• Maximum seam width: 8 mm
• Due to the stiff gel, the gel remains stuck in the seam and consumption is minimized
• Transparent
• Easy to apply yourself

• Consumption of the MS Gel Repair is highly dependent on the width and depth of the cracks. This cannot be said in advance. Consult the representative in advance, price indication +/- 200 grams per linear meter
• Because it is a fairly stiff gel, it flows into the cracks and seams to be treated, but remains as a drop. This minimizes consumption

• Application material: drill, paint mixer, trowel, squeegee, putty knife
• Substrate (dry): concrete or cement deck

• The surface must be clean, dry and dust-free
• Pour the B-component into the can of the A-component
• Mix this using a paint mixer for at least 3 minutes until it becomes a homogeneous mixture
• Use a low speed so that air mixing is reduced to a minimum
• Spread the mixture into the crack or hole with a trowel or squeegee
• Using the tool, push a small amount of gel forward so that the gel flows into the seam
• Iron over the seam several times for optimal distribution and depth of the gel
• Allow the floor to harden for at least 24 hours

• Always read the user manual before use
• Quick and easy to apply
• Dust-free
• Very wear-resistant
• Chemically resistant
• Drying time: 24 hours depending on ambient temperature
• Processing temperature: between 10°C and 30°C
• Processing time after mixing: up to max. 20 minutes, depending on the ambient temperature
• Mechanically loadable after 2 days
• Chemically resistant after 7 days

• Colour: transparent
• Contents: 5.5 kg