Di-O-Clean 20 L, component A 19 L (AR) - Water disinfectant

Di-O-Clean is developed for drinking water treatment and cleaning and disinfection of drinking water systems in the professional livestock industry.

Di-O-Clean consists of two components which will generate, after blending, a pure chlorine dioxide solution, without any chlorine or other harmful by-products.

• Removes the biofilm in the water pipe and prevents the formation of biofilm by dosing continuously
• Removes iron and manganese deposits in the water pipe
• Is not corrosive to the drinking water system after dosing
• Is pH-independent (effective at pH 2-10)
• Suitable for use in the treatment of sulphurous water
• 260% more effective than a disinfectant on the basis of chlorine (sodium hypochlorite, bleach water, active chlorine, etc.)
• Reacts directly with the cell wall of micro-organisms (bacteria, salmonella, yeasts, fungi and viruses), so that no resistance is built up
• Does not form toxic by-products such as THM, HAA, Mutagen X and chlorinated phenols, such as in the use of chlorine
• Does not affect the smell and taste of the water, in contrast to chlorine
• Is very easy to use
• Makes water a safe and valuable nutrient

• Phase 1: Cleaning
• Remove biofilm
• Remove deposits of iron and manganese
• Duration: 3-6 weeks, depending on level of pollution
• Dosage: 330 ml / 1000 liter water
• Can be used with animals inside the stable
• Phase 2: Maintenance
• Prevent regrowth of biofilm
• Reduce of germ pressure
• Duration: continuously
• Dosage: 50-100 ml / 1000 liter water, depending of germ pressure
• Can be used with animals inside the stable
• Phase 3: After using additives
• Remove rests of additives which have been used
• Duration: 3 days
• Dosage: 150-200 ml / 1000 liter water
• Can be used with animals inside the stable
• After 3 days continue with maintenance phase

• Store separate components at a dark place with a temperature of at least 10 °C
• Add the content of the bottle (component B) to the content of the jerry can (component A)
• Close the Jerry can and shake it gently
• Wait for 30 minutes ans the solution is ready to use
• Dose the solution to the drinking water system with the Digi Doser Di-O 2,5 or 10
• Use the solution after blending preferably within 30 days, but maximum within 45 days