Name: Technovit-2-bond claw glue, 160 ml
Brand: Technovit
SKU: 0608115

Technovit-2-bond claw glue, 160 ml

Art. no.: 0608115

Brand: Technovit

This product cannot be ordered via the webshopNo rights may be derived from the information contained on this page

This product is no longer available at MS Schippers

Customer rating: 8.1/10

Knowledge center

Quality products

Technovit-2-bond is a two-component glue to stick a claw block under healthy hooves. In this way, the hoof with the inflammation / damage is relieved and thus can heal better.

Good adhesion
Fast curing adhesive/glue (approximately 30 seconds)
The components are mixed in the proper ratio in the mixing tip
No unpleasant odour
Can be applied with standard dosing gun
Polyurethane glue

Tips for users:

For best results, the claw should be clean and dry.
For the drying of the claws, a hot air gun or a hair dryer can be used.

Application:

Remove the closure of the pattern and insert the mixing tip on it
Push a little bit of glue from the pattern, so that the two components are optimally mixed.
Then apply the adhesive/glue to the claw block
Place the claw block quickly to the pre-prepared, clean, dry and healthy claw
After 30 seconds, the glue has hardened, after about 3 minutes the claw can be loaded again

Application methode	Mixing tip and dosing gun
Pieces	1
Cartridge type	Double
CLP regulation	This item is subject to CLP regulation. Please read the safety instructions before use.
Application within	30 seconds
Warranty	Standard, in accordance with our general service & warranty conditions, listed under the heading "Customer Service -> Complaints & Returns" at the bottom of this web page.
Animal group	Cattle
Manual	Always read the user manual before use
For use on	Claw block
Load-bearing after	3 minutes
Number of treatments	7 - 9
Cartridge connection	Traditional
Volume	160 ml