Technovit-2-bond is a two-component glue to stick a claw block under healthy hooves. In this way, the hoof with the inflammation / damage is relieved and thus can heal better.

• Good adhesion
• Fast curing adhesive/glue (approximately 30 seconds)
• The components are mixed in the proper ratio in the mixing tip
• No unpleasant odour
• Can be applied with standard dosing gun
• Polyurethane glue

• For best results, the claw should be clean and dry.
• For the drying of the claws, a hot air gun or a hair dryer can be used.

• Remove the closure of the pattern and insert the mixing tip on it
• Push a little bit of glue from the pattern, so that the two components are optimally mixed.
• Then apply the adhesive/glue to the claw block
• Place the claw block quickly to the pre-prepared, clean, dry and healthy claw
• After 30 seconds, the glue has hardened, after about 3 minutes the claw can be loaded again