High quality and durable bite nipple to provide drinking water to sows, fattening pigs and weaners. The drinking water is released once the animals push against the press part or move the press part.

Special nipple for use in combination with the TWC concept.

• High acid and oxidation resistance
• Minimal water waste
• No catching or drinking trays required
• Adjustable water dispensing
• A filter keeps back soiling
• High acid resistance due to 316 stainless steel
• Connection: 1/2" male thread

• Bite nipples only release water when the animal takes the nipple in its mouth and bites it; therefore, there is very little water spillage and no need for spill buckets or drinking troughs
• The water supply of the drinking nipple can be adjusted. The nozzle has 3 small openings of different sizes; 0.8 mm, 1 mm and 2 mm. The size of the hole, in combination with the water pressure determines the water flow per minute

• 74 x 21,5 mm (l x Ø)
• Length when mounted: 50 mm
• Nipple diameter: 1/2"
• Diameter press part: 7,8 mm

Nipple: stainless steel

• Drinking nipple mounting angle: 15° - 45°
• Drinking nipple for pigs mounting height
• >5 kg: 15 cm
• >10 kg: 20-25 cm
• >20 kg: 35-40 cm
• >50 kg: 50-60 cm
• >100 kg: 70 cm