TWC Piglet bite nipple 3/8 inox 1/2, 41 mm

High quality and durable bite nipple to provide drinking water to piglets and weaners. The drinking water is released once the animals push against the press part or move the press part.

Special nipple for use in combination with the TWC concept.

• High acid and oxidation resistance
• Minimal water waste
• No catching or drinking trays required
• Adjustable water dispensing
• A filter keeps back soiling
• High acid resistance due to 316 stainless steel
• Connection: 1/2" male thread

• The water is released when the animals push against the pressure piece; as the nipple is not fully inserted into the mouth, the water runs out past the mouth. Therefore, liquid feed nipples can only be used in combination with a liquid feed pan to collect the spilled water
• The water supply of the drinking nipple can be adjusted. The nozzle has 3 small openings of different sizes; 0.8 mm, 1 mm and 2 mm. The size of the hole, in combination with the water pressure determines the water flow per minute

• 66 x 16 mm mm (l x Ø)
• Length when mounted: 41 mm
• Nipple diameter: 3/8"
• Diameter press part: 4,8 mm

Nipple: stainless steel

• Drinking nipple mounting angle: 15° - 45°
• Drinking nipple for pigs mounting height
• >5 kg: 15 cm
• >10 kg: 20-25 cm
• >20 kg: 35-40 cm
• >50 kg: 50-60 cm
• >100 kg: 70 cm