Drik-O-Mat standard, fattening pigs, p/5

This Drik-O-Mat drinker with pin valve is a very robust and durable drinking trough, suitable for the water supply of meat pigs.

The Drik-O-Mat water trough is supplied with nipple, nipple tube support and mounting material for the nipple tube support.

• Deep bowl reduces water loss
• Water dispensing can be precisely adjusted
• Dirt-resistant
• Easy to clean
• Stainless Steel
• Suitable for: 20 meat pigs (20-120kg)

• Mounting height piglets: 10 to 12 cm above the ground
• Mounting height meat pigs: 25 cm above the floor
• Mounting height sows: 35 cm above the

• The drinking trough is made of 2mm thick stainless steel and is equipped with a stainless steel nipple
• The rounded profile prevents the animal from hurting itself and ear tags from getting stuck
• The deep bowl minimizes water loss and the large overhang minimizes dirt from getting into the bowl
• Because a light touch with the valve is sufficient to let some water run, young animals quickly learn how to drink from the bowl
• Connection: on top
• Water is released when animals press on the pressure piece; since the nipple is not taken completely into the mouth, the water drains away from the beak. Liquid feed nipples can therefore only be used in combination with a liquid feed container to catch the spilled water.
• The water supply of the drinking nipple can be adjusted. The nozzle has 3 small openings of different sizes; 0.8 mm, 1 mm and 2 mm. The size of the hole, in combination with the water pressure determines the water flow per minute

• Drinking trough: Stainless steel
• Drinking nipple: Stainless steel

• Connection: ½” inner thread
• Water supply: 1 - 4 l/min